Oracle 19c – Complete Checklist for Manual Upgrades to Non-CDB Oracle Database 19c
This document is created for use as a guideline and checklist when manually upgrading from Oracle 11gR2 (11.2) or Oracle 12c Release 1 (12.1) or Oracle 12c Release 2 (12.2) to Oracle 19c Release
Database Administrators, Support
Step 1: Upgrade Path for 19c Oracle database
Minimum version of the database that can be directly upgraded to Oracle 19c
Intermediate upgrades needs to be carried for following releases
|Source Database||Intermediate upgrade path||Target database|
|10.2.0.2, 10.2.0.3, 10.2.0.4, 10.2.0.5||–>||220.127.116.11/18.104.22.168||–>||19c|
|22.214.171.124 or earlier||–>||126.96.36.199||–>||19c|
For any multi-step upgrade, if you must carry out two upgrades to upgrade to the current release, then you must run the preupgrade script twice: First, for the intermediate upgrade release, and second, for the target upgrade target release. For example, if the database from which you are upgrading is running Oracle Database 10g, then follow these steps:
- Upgrade release 10.2.0.5 to release 188.8.131.52 using the instructions in Oracle Database Upgrade Guide 12c Release 1 (12.1), including running the pre-upgrade script for 184.108.40.206.
- Upgrade Oracle Database 12c release 1 (220.127.116.11) directly to Oracle Database 19c. Use the instructions in this article, Oracle Database Upgrade Guide, including running the preupgrade script for 19c.
Upgrade to an intermediate Oracle Database release that can be directly upgraded to the current release. Upgrade Oracle Database releases that are not supported for direct upgrade in this release to an intermediate Oracle Database release that is supported for direct upgrade.
This restriction does not apply if you use Oracle Data Pump export/import to migrate data to the new release.
- If you are upgrading from release 18.104.22.168 or 22.214.171.124, then you must first upgrade to Oracle Database 11g release 2 (126.96.36.199).
- If you are upgrading from release 10.2.0.2, 10.2.0.3, 10.2.0.4,10.2.0.5 or 10.1.0.5, then you must first upgrade to release 11.2. or 12.1
- If you are upgrading from release 188.8.131.52, then you must first upgrade to a sequence of intermediate Oracle Database releases:
- Upgrade from release 184.108.40.206 to release 220.127.116.11. Then upgrade from release 11.2 to 19c
Changes in 19c release
Support for DBMS_JOB
Oracle continues to support the DBMS_JOB package. However, you must grant the CREATE JOB privilege to the database schemas that submit DBMS_JOB jobs.
Oracle Scheduler replaces the DBMS_JOB package. Although DBMS_JOB is still supported for backward compatibility, Oracle strongly recommends that you switch from DBMS_JOB to Oracle Scheduler.
- During the 19c upgrade for each job in DBMS_JOB a corresponding entry will be created with DBMS_SCHEDULER
- The old DBMS_JOB interface still works. But using it will always create a corresponding entry in the scheduler
- Pre-upgrade check in preupgrade.jar checks for inconsistencies or any issues
Desupport of Oracle Multimedia
Oracle Multimedia is desupported in Oracle Database 19c, and the implementation is removed.
As an alternative for image processing and conversion, Oracle recommends that you store multimedia content in SecureFiles LOBs, and use third party products, such as Piction. The ORDIM component remains in the registry and still has a VALID status. Oracle Multimedia objects and packages remain in the database. However, these objects and packages no longer function, and raise exceptions if there is an attempt made to use them. Oracle Locator is not affected by the desupport of Oracle Multimedia.
Desupport of Oracle Streams
Starting in Oracle Database 19c (19.1), Oracle Streams is desupported. Oracle GoldenGate is the replication solution for Oracle Database.
Note that Oracle Database Advanced Queuing is not deprecated, and is fully supported in Oracle Database 19c. Oracle Streams did not support features added in Oracle Database 12c (12.1) and later releases, including the multitenant architecture, LONG VARCHAR, and other new features. Oracle Streams replication functionality is superseded by GoldenGate.
Preupgrade check “STREAMS_SETUP” will warn if Oracle Streams is presented. To remove Oracle streams in 18c refer to Oracle documentation, similarly refer to section “Removing an Oracle Streams Configuration” in the Oracle Streams Concepts and Administration Guide specific for the Oracle release from which you are removing.
Step 2: Requirements and recommendations for source database
- Take a cold or hot back up of the source database.
- Disable any custom triggers that would get executed before / after DDL. You can enable it once upgrade is completed.
- Data security roles defined in a release 11g Oracle Database instance are not automatically converted to ORAS. Before you upgrade an 11g database to Oracle Database 19c, you must delete any data security roles that are defined in the 11g database. After the upgrade, you may use Analytic Workspace Manager 19c to define the data security roles again.
- If you upgrade an 11g database to Oracle Database 19c without deleting the 11g data security roles, then any data security policies that include a data security role are invalid in the Oracle Database 19c database.
- If your source version’s time zone is already higher than the destination’s home, then apply the matching or any higher time zone patch to your destination home before upgrade. For latest DST patch refer to Note 412160.1
- IF APEX is installed then it is recommended to upgrade APEX in the source DB first before upgrading DB. Refer to Note 1088970.1
- No INVALID object / Components in Source
- Execute Preupgrade scripts before upgrade and review the preupgrade log for any issues.
- Execute dbupgdiag.sql (refer Note 556610.1 to download this script) and verify whether there are any INVALID components or objects owned by SYS/SYSTEM. If any, fix them before proceeding to upgrade the database. You can execute utlrp.sql multiple times to VALIDate them, if still objects are INVALID, create a service request with Oracle support.
Step3: Requirements and recommendations for target ORACLE_HOME
- Verify the whether your operating system is certified for 19c. Click here to launch certification portal
- Install 19c, verify there are no installation related issues.
- Download and install latest RU if any
- Copy spfile or pfile from source ORACLE_HOME (under $ORACLE_HOME/dbs) to target home
- Remove any _ (underscore) parameter, obsolete and deprecated parameters in pfile
- Note min value of COMPATIBLE parameter to upgrade 19c is “11.2.0”, make sure you have COMPATIBLE parameter is set to 11.2.0 or greater
- Review patch recommendations as given in the article “Patches to apply before upgrading Oracle GI and DB to 19c (Doc ID 2539751.1)”
- Apply patch 29213893 on target ORACLE_HOME to avoid ORA-01422 error – refer: Database Upgrade to 12.2, 18c, 19c fails with ORA-01422, ORA-06512 for SYS.DBMS_STATS (Doc ID 2525596.1)
Step 4: Pre-upgrade checks
Clean up database
Empty the recycle bin
Check for INVALID objects in SYS and SYSTEM
Check for duplicate objects in SYS and SYSTEM
Check for INVALID, mandatory, obsolete components
Note: These will be taken care by preupgrade.jar.
Check materialized views
Check the status of all materialized views (MV), and refresh any materialized views that are not fresh.
Check the size of your materialized view logs. If any materialized view logs have non-zero rows, then refresh the base table materialized views.
Check the size of direct loader logs and PMOP logs (partition maintenance operation logs). If any direct loader logs or PMOP logs have non-zero rows, then refresh the MVs indicated by the logs
Before upgrading Oracle Database, you must wait until all materialized views have completed refreshing.
Run the following SQL query:
Note: These will be taken care by preupgrade.jar. Review the preupgrade logs
Schema-Only Accounts and Upgrading EXPIRED Password Accounts
Before starting your upgrade, determine if you want to use password authenticate to default Oracle Database accounts where their passwords are in EXPIRED status, and their account is in LOCKED status
During upgrades to Oracle Database 19c, default Oracle accounts that have not had their passwords reset before upgrade (and are set to EXPIRED status), and that are also set to LOCKED status, are set to NO AUTHENTICATION after the upgrade is complete.
Because of this new feature, default accounts that are changed to schema-only accounts become unavailable for password authentication. The benefit of this feature is that administrators no longer have to periodically rotate the passwords for these Oracle Database-provided schemas. This feature also reduces the security risk of attackers using default passwords to hack into these accounts.
If you want to prevent these Oracle accounts from being set to schema-only accounts during the upgrade, then you must either set a valid strong password for the account before you start the upgrade, or set a valid strong password for these accounts after upgrade, or unlock the accounts before you log in to the upgraded Oracle Database.
After the upgrade, an administrator can also enable password authentication for schema-only accounts. However, for better security, Oracle recommends that you keep these accounts as schema only accounts.
Copying Transparent Encryption Oracle Wallets
If Oracle wallet used with Transparent Data Encryption (TDE), then copy the sqlnet.ora and wallet file to the new Oracle home. You must copy the sqlnet.ora and the wallet file manually before starting the upgrade.
- Log in as an authorized user.
- Manually copy the sqlnet.ora file, and the wallet file, ewallet.p12, to the new release Oracle home.
Open the Oracle wallet in mount.
SQL> ALTER SYSTEM SET ENCRYPTION WALLET OPEN
Understanding Password Case Sensitivity
Starting with Oracle Database 12c release 2 (12.2), the default password-based authentication protocol configuration excludes the use of the case-insensitive 10G password version. By default, the SQLNET.ORA parameter SQLNET.ALLOWED_LOGON_VERSION_SERVER is set to 12, which is an Exclusive Mode.
For greater security, Oracle recommends that you leave case-sensitive password-based authentication enabled. This setting is the default. However, you can temporarily disable case-sensitive authentication during the upgrade to new Oracle Database releases. After the upgrade, you can then decide if you want to enable the case-sensitive password-based authentication feature as part of your implementation plan to manage your password versions.
Before upgrading, Oracle recommends that you determine if this change to the default password-based authentication protocol configuration affects you. Perform the following checks:
- Identify if you have accounts that use only 10G case-insensitive password authentication versions.
- Identify if you have Oracle Database 11g release 2 (18.104.22.168) database or earlier clients that have not applied critical patch update CPUOct2012, or a later patch update, and have any account that does not have the case-insensitive 10G password version.
- Ensure that you do not have the deprecated parameter SEC_CASE_SENSITIVE_LOGON set to FALSE. Setting this parameter to FALSE prevents the use of the case-sensitive password versions (the 11G and 12C password versions) for authentication.
For more information refer 19c Oracle database documentation
Checking for Accounts Using Case-Insensitive Password Version
Identify if the Oracle Database that getting upgraded has accounts or configuration parameters that are using a case-insensitive password version.
By default, in Oracle Database 12c release 2 (12.2) and later releases, the 10G password version is not generated or allowed.
If you do not set SQLNET.ALLOWED_LOGON_VERSION_SERVER to a permissive authentication protocol that permits case-insensitive versions, and you do not want user accounts authenticated with case-insensitive password versions to be locked out of the database, then you must identify affected accounts, and ensure that they are using case-sensitive password versions.
For more information refer 19c Oracle database documentation
Running Upgrades with Read-Only Tablespaces
Use the Parallel Upgrade Utility with the -T option to take schema-based tablespaces offline during upgrade. Oracle Database can read file headers created in earlier releases, so you are not required to do anything to them during the upgrade. The file headers of READ ONLY tablespaces are updated when they are changed to READ WRITE. If the upgrade suffers a catastrophic error, so that the upgrade is unable to bring the tablespaces back online, then review the upgrade log files. The log files contain the actual SQL statements required to make the tablespaces available. To bring the tablespaces back online, you must run the SQL statements in the log files for the database, or run the log files for each PDB.
Viewing Tablespace Commands In Upgrade Log Files
If a catastrophic upgrade failure occurs, then you can navigate to the log directory (Oracle_base/cfgtoologs/dbua), and run commands in the log files manually to bring up tablespaces. You can view tablespace commands in the following log files:
Non-CDB Upgrades: catupgrd0.log
PDB databases: catupgrdpdbname0.log, where pdbname is the name of the PDB that you are upgrading.
At the beginning of each log file, you find SQL statements such as the following, which sets tables to READ ONLY:
Near the end of each log file, you find SQL statements to reset tables to READ WRITE:
Preparing the New Oracle Home for Upgrading
- Copy configuration files from the Oracle home of the database being upgraded to the new release Oracle Database Oracle home.
- If you have a password file that resides within the old environment Oracle home, then move or copy the password file to the new Oracle home. It is recommended to recreate the password file freshly to leverage the new features (if any) provided by orapwd utility.
- Remove desupported initialization parameters and adjust deprecated initialization parameters. In new releases, some parameters are desupported, and other parameters are deprecated. Remove all desupported parameters from any parameter file that starts the new Oracle Database instance. Desupported parameters can cause errors in new Oracle Database releases. Also, alter any parameter whose syntax has changed in the new release.
- If you are upgrading a cluster database, then you need to change CLUSTER_DATABASE=FALSE before starting upgrade
Prerequisites for Preparing Oracle Home on Windows
System must meet these requirements before starting Oracle Database upgrade on Microsoft Windows platforms.
For security reasons, different Microsoft Windows user accounts configured as Oracle home users for different Oracle homes are not allowed to share the same Oracle Base.
- Database upgrade is supported when the same Windows user account is used as the Oracle home user in both the source and destination Oracle homes.
- Database upgrade is supported when the Oracle home from which the database is being upgraded uses the Windows Built-in Account. Releases earlier than Oracle Database 12c (release 11.2 and earlier) only supported the built-in account option for the Oracle home user on Windows.
- The Oracle home user may not have access to files outside its own Oracle Base and Oracle home. If that is the case, then if you choose a different Oracle Base during upgrade, it is possible that Oracle Database services cannot access files in the older Oracle Base. Using DBUA for database upgrade ensures that the Oracle home user has access to files outside of its own Oracle Base and its own Oracle home.
- Before upgrading manually, or before using the custom files from the older Oracle Base (for example, wallets, configuration files and other custom files ), you must grant access to the Oracle home user for these outside files, or copy these files to the new Oracle Base.
Databases That Use Oracle Label Security and Oracle Database Vault
Audit Table Preupgrade and Archive Requirements
For Oracle Database releases earlier than 12.1 using Oracle Label Security and Oracle Database Vault, you must run the OLS preprocess script before you upgrade.
If you are upgrading from a database earlier than Oracle Database release 12.1 that uses Oracle Label Security (OLS) and Oracle Database Vault, then you must first run the OLS preprocess script, olspreupgrade.sql, to process the aud$ table contents. The OLS upgrade moves the aud$ table from the SYSTEM schema to the SYS schema. The olspreupgrade.sql script is a preprocessing script required for this move.
Running the olspreupgrade.sql script before upgrading is mandatory for upgrading databases earlier than Oracle Database release 12.1 that use Oracle Label Security and Oracle Database Vault. Once you have upgraded to Oracle Database release 12.1, you do not have to perform the OLS preprocessing procedure going forward to patch or upgrade the database.
The olspreupgrade.sql script creates a temporary table PREUPG_AUD$ in the SYS schema and moves the SYSTEM.aud$ records to SYS.PREUPG_AUD$. As a safety measure, Oracle recommends that you archive your audit trail before running the olspreupgrade.sql script. If Oracle Label Security is installed on your database, and you are upgrading from an earlier release, then you must run the OLS preprocess script before upgrading.
Oracle Database Vault and Upgrades of Oracle Database Release 11.2
If Oracle Label Security is installed in the earlier release that you are upgrading, then grant the DV_PATCH_ADMIN role to SYS.
To run the OLS preprocess script on a release 11.2 database before upgrading:
1. Copy the following scripts script from the newly installed Oracle home (19c) to the Oracle home of the database that needs to be upgraded (11.2):
2. Start SQL*Plus and connect as DVOWNER to the database that you want to upgrade.
3. Run the following statement:
4. At the system prompt, connect SYS as SYSDBA:
5. Run the preprocess scripts for Data Vault
You may continue to run your applications on the database while the preprocess scripts are running.
6. After the olspreupgrade.sql completes its run successfully, start SQL*Plus and connect to the database as DVOWNER.
7. Run the following SQL statement:
Granting the DV_PATCH_ADMIN Role to SYS for Oracle Database Vault
If Oracle Database Vault is enabled, then to perform checks for Oracle Data Vault, the upgrade process requires running three SQL scripts – olspreupgrade.sql, emremove.sql, catnoamd.sql
Start SQL*Plus and connect as DVOWNER to the database that you want to upgrade.
Run the following statement:
Manually remove DB control with emremove.sql
Stop/shutdown DB control
Login as sysdba
SQL>SET SERVEROUTPUT ON
SQL>@emremove.sql >> Script located in new 12c ORACLE_HOME/rdbms/admin
Manually remove ORACLE_HOME/HOSTNAME_SID/ and ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_HOSTNAME_SID directory from the system
On windows delete DB Console service OracleDBConsoleSID
Ensure no files are in Back up mode before starting the upgrade
Run the following statement:
Purge Recycle bin
To empty the database recycle bin, run the following command:
Note: The database recycle bin must be empty during the upgrade process to avoid possible ORA-00600 errors, and to minimize the upgrade time.
Preserve performance statistics
Check network performance
Gather Optimizer statistics
To decrease the amount of downtime, gather statistics. Oracle recommends that you use the DBMS_STATS.GATHER_DICTIONARY_STATS procedure to gather these statistics. For example, enter the following SQL statement:
Checking Time zone settings
Time zone should less than or equal to target database time zone version. If source is having higher time zone, then apply time zone patch on target ORACLE_HOME to match the source.
About Upgrading Oracle OLAP Data Security Policies
Data security roles defined in a release 11g Oracle Database instance are not automatically converted to ORAS. Before upgrading Oracle Database Release 11g to a current Oracle Database release, delete any data security roles that are defined in the 11g database. After the upgrade, you can use the new release Oracle Database Analytic Workspace Manager to define the data security roles again.
If DB us upgraded from an 11g database without deleting the 11g data security roles, then any data security policies that include a data security role are invalid in the later Oracle Database releases.
Step 5: Preupgrade step
Execute Preupgrade script from source home
FILE – Use this option to direct output to a file
TEXT – Use this option to specify log should be in Text format (other option is to have XML output)
DIR – Logs will be created under <output_dir>
Note: You can download latest preupgrade script from the document – How to Download and Run Oracle’s Database Pre-Upgrade Utility (Doc ID 884522.1)
The Pre-Upgrade Tool (preupgrade.jar) creates the following files:
The log file preupgrade.log.
The preupgrade_fixups_pdbname.sql (for PDBs, where pdbname is the name of the PDB) or preupgrade_fixups.sql script (Non-CDB databases).
The postupgrade_fixups_pdbname.sql (for PDBs, where pdbname is the name of the PDB) or postupgrade_fixups.sql script (Non-CDB databases). Execute this script once upgrade is completed.
It is recommended to execute pre-upgrade fixup script, if any, which are AUTO FIXABLE
Preupgrade fixup script
Before upgrade is started, execute preupgrade fixups (
preupgrade_fixups.sql) script manually in SQL*Plus to resolve many of the issues identified by the preupgrade tool.
Dependencies on Network Utility Packages
After executing preupgrade script, verify the preupgrade log
WARNING: --> Database contains schemas with objects dependent on network packages. .... Refer to the Database Upgrade Guide for instructions to configure Network ACLs. .... USER WKSYS has dependent objects. .... USER SYSMAN has dependent objects. .... USER FLOWS_010600 has dependent objects.
Execute the following query to view DBA_DEPENDIENCIES
To ensure that the new access controls are part of your upgrade testing, prepare a post-upgrade script to make the scripts available in your database environment. After the upgrade, grant specific required privileges. Access is based on the usage in the original database.
Check Time zone version
Check if target database’s time zone version is lower than the source database time zone version. If yes, before starting upgrade time zone should be upgrade without fail. RDBMS DST patches are available in Note 412160.1
Backing Up Oracle Database for Upgrading
Suggested to backup Oracle database after you run the Pre-Upgrade Information Tool. Take backup or create a guaranteed restore point or both. Test your backup. Ensure there is a proper fallback plan in case of any issues.
rman “target / nocatalog”
ALLOCATE CHANNEL chan_name TYPE DISK;
BACKUP DATABASE FORMAT ‘some_backup_directory%U’ TAG before_upgrade;
BACKUP CURRENT CONTROLFILE FORMAT ‘controlfile location and name’;
Back Up Files to Preserve Downgrade and Recovery Options
Oracle Data Guard Broker Configuration File and Downgrades
With upgrades to Oracle Database 19c and later releases, you must back up the Data Guard broker configuration file to preserve the capability to downgrade to an earlier release.
In releases before Oracle Database 19c, Oracle Database settings that are mapped to Oracle Data Guard broker properties are maintained in the Oracle Data Guard broker configuration file, and can be modified using the DGMGRL command-line interface. However, starting with Oracle Database 19c, these database settings are no longer stored in the broker configuration file. As a result of this change, although you can continue to modify these properties using DGMGRL, the values that you modify are no longer stored in the Oracle Data Guard broker configuration file. Instead, the DGMGRL commands directly modify the Oracle Database initialization parameters or database settings to which these Oracle Data Guard Broker properties are mapped.
Because of this change to the way that property settings are managed, if you use Oracle Data Guard broker, then Oracle recommends that you export your earlier release Oracle Data Guard broker configuration file to a secure backup location before you start the upgrade. If you do not back up the Oracle Data Guard broker configuration file before the upgrade, then after the upgrade, you cannot downgrade to an earlier release and retain the property options you previously selected for Oracle Data Guard
Exporting a Broker Configuration
Use the EXPORT CONFIGURATION command to export the metadata contained in the broker configuration file to a text file.
The directory in which the broker configuration file is stored must be accessible to the Oracle server process.
Connect to the primary database.
DGMGRL> CONNECT sysdg@North_Sales.example.com;
Connected to “North_Sales”
Connected as SYSDG.
Export the broker configuration.
The following command exports the broker configuration and stores it in a file named myconfig.txt in the trace directory.
DGMGRL> EXPORT CONFIGURATION TO ‘myconfig.txt’;
Step 6: Upgrade Database to 19c
Start the upgrade
Shut down the database.
Steps specific to Windows :
If your operating system is Windows, then complete the following steps:
a. Stop the OracleServiceSID Oracle service of the database you are upgrading,where SID is the instance name. For example, if your SID is ORCL, then enter the following at a command prompt:
b. Delete the Oracle service at a command prompt using ORADIM. Refer to your platform guide for a complete list of the ORADIM syntax and commands.
For example, if your SID is ORCL, then enter the following command.
c. Create the service for the new release Oracle Database at a command prompt using the ORADIM command of the new Oracle Database release.
Set the environment variables to point to target ORACLE_HOME
export ORACLE_HOME=<path to Oracle 19c>
export ORACLE_BASE=<path to Oracle_Base set during installation>
Copy the SPFILE.ORA or INIT.ORA file from the old Oracle home to the target Oracle home.
Start DB in upgrade mode from target ORACLE_HOME
SQL> startup upgrade;
Execute Post-Upgrade Status Tool, utlusts.sql and review the upgrade spool log file. You run the Post-Upgrade Status Tool in the environment of the new release.
$ sqlplus “/as sysdba”
Note: In 19c Earlier version utluNNNs.sql is replaced by utlusts.sql
Note: While executing utlusts.sql, if “ORA-06502: PL/SQL: numeric or value error: character string buffer too small” is received, execute
$ sqlplus “/as sysdba”
SQL> @utlusts.sql TEXT
If you are using Oracle Clusterware, set CLUSTER_DATABASE=TRUE and you must upgrade the Oracle Clusterware keys for the database. Run srvctl for Oracle Database 19c to upgrade the database. For example:
Check upgrade status
Execute dbupgdiag.sql and review the logs. To download this script refer to Note 556610.1
Recompile INVALID Objects
Execute utlrp.sql multiple times till the number of INVALID objects becomes constant
Step 7: Post-upgrade
Setting Environment variables on Linux and Unix
Confirm that the following environment variables point to the directories of the new Oracle home:
Update oratab entries
Modify the corresponding entry in the /etc/oratab file to point to the new ORACLE_HOME location.
Post-upgrade fixup script
Execute post-upgrade fixup scripts generated by the pre-upgrade script.
Create or Migrate Your Password File with ORAPWD
If the REMOTE_LOGIN_PASSWORDFILE initialization parameter is set to EXCLUSIVE, then create or migrate the password file with ORAPWD. Oracle Database 12c and later releases provide a new option to ORAPWD for migrating the password file from your existing database.
With Oracle Database 12c release 2 (12.2) and later releases, if REMOTE_LOGIN_PASSWORDFILE is set to SHARED, then you receive a pre-upgrade check validation warning. You can choose one of the following options to correct this issue:
Disable the password file-based authentication entirely by setting REMOTE_LOGIN_PASSWORDFILE = NONE
Limit the password file-based authentication by setting REMOTE_LOGIN_PASSWORD = EXCLUSIVE
Recovery Catalog Upgrade
If you use a version of the recovery catalog schema that is older than that required by the RMAN client, then you must upgrade it. You can upgrade the Recovery catalog by executing the UPGRADE CATALOG command
Please refer to Oracle documentation under “Upgrading the Recovery Catalog” for complete information and steps
Upgrade the Time Zone File Version After Upgrading Oracle Database
If the Pre-Upgrade Information Tool instructed you to upgrade the time zone files after completing the database upgrade, then use the DBMS_DST PL/SQL package to update the RDBMS DST (timezone) version.
For latest DST patch refer to Note 412160.1.
The following scripts get delivered with Oracle Database 18c onward
Script to gives how much TIMESTAMP WITH TIME ZONE data there is in a database using stats info. No restart required.
Script to approximate how much TIMESTAMP WITH TIME ZONE data there is in a database using a COUNT(*) for each table that has a TSTZ column. This script is useful when using DBMS_DST package or the scripts of utlz_upg_check.sql and utlz_upg_apply.sql scripts.
Time zone upgrade check script
Time zone apply script. Warning: This script will restart the database and adjust time zone data.
Upgrading Statistics Tables
If you created statistics tables using the DBMS_STATS.CREATE_STAT_TABLE procedure, then upgrade these tables by running DBMS_STATS.UPGRADE_STAT_TABLE. In the following example, SYS is the owner of the statistics table and ‘dictstattab’ is the name of the statistics table.
Perform this procedure for each statistics table.